PROGRAMING YOUR PXR3 CONTROLLER FOR THE 1ST PROGRAM
PUSH AND HOLD THE SEL BUTTON UNTIL THE DISPLAY READS “STAT” PUSH THE DOWN ARROW TWICE UNTIL THE DISPLAY READS SV1 PRESS SEL ONCE ENTER YOUR 1ST TARGET TEMP- 950. PRESS SEL ONCE THEN ARROW DOWN ONCE TO 7N1R HIT SEL ENTER THE RAMP TIME TO SV1-0.05. PRESS THE SEL ONCE THEN THE DOWN ARROW ONCE TO 7N1S HIT SEL ENTER YOUR SOAK TIME FOR SV1-1.30. PRESS THE SEL ONCE THEN ARROW DOWN ONCE TO SV2 HIT SEL ENTERYOUR 2ND TARGET TEMPERATURE-700. PRESS SEL ONCE THEN ARROW DOWN ONCE TO 7N2R HIT SEL ENTER YOUR RAMP TIME FOR SV2 3.00. PRESS SEL ONCE THEN ARROW DOWN ONCE TO 7N2S HIT SEL ENTER YOUR SOAK TIME FOR SV2- 0. PRESS SEL ONCE THEN ARROW DOWN ONCE TO SV3 HIT SEL ENTER YOUR 3RD TARGET TEMP-0. PRESS SEL ONCE THEN ARROW DOWN ONCE TO 7N3R HIT SEL ENTER THE RAMP TIME TO SV3-0. PRESS THE SEL ONCE THEN THE DOWN ARROW ONCE TO 7N3S HIT SEL ENTER YOUR SOAK TIME FOR SV3-0. PRESS THE SEL ONCE THEN ARROW DOWN ONCE TO SV4 HIT SEL ENTER YOUR 4TH TARGET TEMP-0. PRESS SEL ONCE THEN ARROW DOWN ONCE TO 7N4R HIT SEL ENTER THE RAMP TIME TO SV4-0. PRESS THE SEL ONCE THEN THE DOWN ARROW ONCE TO 7N4S HIT SEL ENTER YOUR SOAK TIME FOR SV4. -0) (INSTALLED)
PROGRAMMING YOUR PXR3 CONTROLLER FOR THE 2ND PROGRAM
PUSH AND HOLD THE SEL BUTTON UNTIL THE DISPLAY READS “STAT” PUSH THE DOWN ARROW UNTIL THE DISPLAY READS SV5 PRESS SEL ONCE, ENTER YOUR 1ST TARGET TEMP. PRESS SEL ONCE THEN ARROW DOWN ONCE TO 7N5R HIT SEL ENTER THE RAMP TIME TO SV5. PRESS THE SEL ONCE THEN THE DOWN ARROW ONCE TO 7N5S HIT SEL ENTER YOUR SOAK TIME FOR SV5. PRESS THE SEL ONCE THEN ARROW DOWN ONCE TO SV6 HIT SEL ENTER YOUR 2ND TARGET TEMPERATURE. PRESS SEL ONCE THEN ARROW DOWN ONCE TO 7N6R HIT SEL ENTER YOUR RAMP TIME FOR SV6. PRESS SEL ONCE THEN ARROW DOWN ONCE TO 7N6S HIT SEL ENTER YOUR SOAK TIME FOR SV6. PRESS SEL ONCE THEN ARROW DOWN ONCE TO SV7 HIT SEL ENTER YOUR 3RD TARGET TEMP. PRESS SEL ONCE THEN ARROW DOWN ONCE TO 7N7R HIT SEL ENTER THE RAMP TIME TO SV7. PRESS THE SEL ONCE THEN THE DOWN ARROW ONCE TO 7N7S HIT SEL ENTER YOUR SOAK TIME FOR SV7. PRESS THE SEL ONCE THEN ARROW DOWN ONCE TO SV8 HIT SEL ENTER YOUR 4TH TARGET TEMP. PRESS SEL ONCE THEN ARROW DOWN ONCE TO 7N8R HIT SEL ENTER THE RAMP TIME TO SV8 PRESS THE SEL ONCE THEN THE DOWN ARROW ONCE TO 7N8S HIT SEL ENTER YOUR SOAK TIME FOR SV8 (NOT INSTALLED)
CHOOSING PROGRAMS 1 OR 2
#2 WHEN YOU ARE READY TO RUN A PROGRAM. IF YOU WANT TO RUN THE SAME PROGRAM YOU RAN LAST TIME SKIP THIS STEP AND GO TO #3. TO CHANGE THE PROGRAM FROM 1 TO 2 OR FROM 2 TO 1.PUSH AND HOLD THE SEL BUTTON UNTIL THE DISPLAY READS STAT NOW PUSH THE DOWN ARROW ONCE SO THE DISPLAY READS PTn THEN PUSH THE SEL BUTTON ONCE, HERE IT WILL READ THE LAST PROGRAM YOU RAN (1 OR 2) THEN PRESS THE UP OR DOWN ARROW TO DISPLAY THE PROGRAM YOU WISH TO RUN. NOTE: ARROWING TO 3 WILL RUN BOTH PROGRAMS DO NOT USE # 3 . LEAVE IT ON 1 OR 2 FOR ABOUT 20 SECONDS UNTIL THE DISPLAY GOES BACK TO THE TEMPERATURE IN THE KILN.
RUNNING A PROGRAM
#3 PUSH AND HOLD THE SEL BUTTON UNTIL THE DISPLAY READS PROG PRESS THE SEL ONCE SO THE DISPLAY READS OFF THEN PUSH THE UP ARROW ONCE SO THE DISPLAY READS RUN THE RUN WILL BLINK, PUSH SEL TWICE,RUN WILL STAY LIT. LEAVE IT THERE, THIS WILL START YOUR PROGRAM, IN ABOUT 20 SECONDS THE DISPLAY WILL GO BACK TO THE TEMPERATURE IN THE KILN. THEN SHUT OFF WHEN THE PROGRAM IS COMPLETE (IT WILL STILL BE READING THE TEMPERATURE IN THE KILN).
